Amberroot ReHub MPPT – 12/24V 40A: Best MPPT Solar Charge Controller
Amberroot REhub 12/24V 40A MPPT solar charge controller is a robust and true MPPT solar charge controller and best in class. It has unique Net Current Control system which helps to utilize full solar power available at any point of time yet keeping the battery charging current at the required limit only.
Supports 24v panel with 12v inverter-battery system.
REhub MPPT enables the addition of Solar PV To existing power back up solutions With REhub MPPT add Solar PV to existing back up solutions without the expense of replacing the UPS/Inverter and Batteries to get a Solar PCU (Power Conditioning Unit) equivalent experience. REhub MPPT controls the charging of the batteries from from two sources – the grid (charging by the existing UPS) and the installed Solar PV.
In The Box: Sales Package
Solar Charge controller, Integrated Solar priority controller, Integrated Net current monitoring and control, Integrated 3 Pin plug with 1.5sqmm AC cable and Socket, 10Sqmm , 1 Mtr Battery cable
|Other Dimensions||Package : 30CM X 19CM X 19CM|
|Warranty Summary||One year Warranty against manufacturing defects|
|Service Type||Ship to Factory|
|Covered in Warranty||Limited Warranty|
|Not Covered in Warranty||Connecting Voltage > 90V across PV terminals. Connecting PV or AC terminals to Battery terminals.|
|Usage/Application||Solar System Controller|
|Model Number/Name||REhub MPPT|
|Charge Controller type||MPPT CHARGE CONTROLLER|
|Rated Voltage||12/24V Battery systems,90V open circuit|
|Solar Array||Dual Array|
|Current Range||10 TO 40A|
|Battery Type||TUBULAR INVERTER BATTERY|
|Is It Portable||Portable|
|Mppt Tracking Efficiency||99|
|Over Charge Protection||LIMITING BATTERY CHARGE CURRENT|
|Pv Input Vmp Minimum||90,30|
|Pv Input Voc Maximum||90V|
|V Max In On Battery Terminal||24V|
|V Max In On Panel Terminal||90V|
|Charging Stages||3 STAGEBULK,ABSORPTION,FLOAT|
|Communication||MODBUS OVER RS485|
|Max Dc Output Current||40A|
|No. Of 12V Batteries In Series||ONE OR TWO|
|Battery Voltage Range||12/24V|
|Maximum Battery Charging Current||4,SETABLE,SETTABLE INDEPENDENT OF CHARGER OUTPUT|
|I deal in||New Only|
|Remote Control And Communication||YES|
With REhub MPPT add Solar PV to existing back up solutions without the expense of replacing the UPS/Inverter and Batteries to get a Solar PCU (Power Conditioning Unit) equivalent experience.
REhub MPPT controls the charging of the batteries from from two sources – the grid (charging by the existing UPS) and the installed Solar PV.
Adding Solar PV is the logical way to extend the back up hours and reduce electricity bills – but must be done the right way. Add too little PV Watts-the Solar addition does not really serve the purpose of long back up. Larger PV systems could damage batteries and cause their premature failure.
REhub MPPT provides the right combination for adding Solar PV. REhub MPPT intelligently controls the charging process in a way that keeps the batteries safe and therefore extends their life. They allow the maximal use of Solar power.
The unit is based on an high efficiency MPPT charge controller that maximizes the extraction of energy from the PV panel. MPPT control and the innovative design of the charger allow for a very high input to output Voltage ratio that reduces the system cost compared to that of a cheaper PWM controller.
REhub MPPT keeps batteries safe:
When the energy from the Solar panels are servicing the loads or when both the sources of energy (Solar and Grid through the Inverter) are charging the batteries, the charge current to the batteries can be higher than what is safe for the batteries. REhub MPPT controls the charging of the batteries to prevent premature failure of the batteries.
REhub MPPT Maximizes Solar PV Without Excessively Cycling The Batteries:
REHub MPPT provides a hub like interface for the connected PV panels, the existing Inverter, the utility grid and the batteries.
REHub MPPT controls the flow of power from the available sources to the connected loads through the inverter. REHub MPPT exercises this control to maximize the usage of Solar energy while making sure the back up needs are not compromised.
REhub MPPT Solar Charging is High efficiency MPPT Based:
MPPT stands for Maximum Power Point Tracking. Extracting power from the panels using MPPT can deliver up to 30% more energy compared to PWM chargers. Using MPPT also allows for the use of economical larger PV panels which are produced in volumes for MW plants on rooftops. REhub’s power electronics design also does power conversion at better than 95% efficiency.
REhub MPPT Lowers System Costs:
REhub MPPT’s innovative Power electronics design allows for a very high Input to Output ratio of Voltages without loss of efficiency. This translates into the ability of the systems integrator to wire the PV panels in an all series arrangement- reducing system costs.
There are savings in:
- Wiring costs– Input Voltage can be much higher than the battery system Voltage – and therefore the size of the wire can be smaller = Lower costs in wiring.
- PV Panel costs– On a per Watt-Peak (Wp) basis – larger PV panels (More cells- more commonly used in MW installations) cost lesser than Smaller PV Panels ( Lesser cells).
- High efficiency MPPT charger combined with the interface to existing Inverters
- Controls the net current delivered to the batteries
- Display and data port to monitor performance and view the cumulative energy generated using Solar.
|Dimensions||30 × 20 × 18.5 cm|